Pinarello Most Croxover Oversize BB

AC20030_1
AC20030_1 Posts: 109
edited December 2017 in Workshop
Hi. My Pinarello has its original Most branded crank on and i am looking to change to a Sram Red crank. The frame is labelled "Most Croxover Oversize bb" where the current bb is. Question is, which would fit, GXP or BB30 Sram Red crank? Will either fit onto the existing bb or do i need to buy a new one? Also if i changed the bb as well could i fit either a GXP or BB30 as long as it is italian threaded? Cheers.

Comments

  • Monty Dog
    Monty Dog Posts: 20,614
    MOST Croxover is apparently conventional Italian threaded BB so you can fit any crank that uses a 24mm spindle e.g. Hollowtech 2, FSA MegaExo, SRAM GXP etc - just make sure you order the Italian threaded cups. You cannot fit BB30 to a threaded BB shell as there's simply no room for the bearings.
    Make mine an Italian, with Campagnolo on the side..
  • AC20030_1
    AC20030_1 Posts: 109
    Thats great info, thanks for the help.
  • Monty Dog
    Monty Dog Posts: 20,614
    Strongly recommend you follow instructions for BB cup installation and particularly to use medium Loctite on the BB cups for Italian-threaded BBs - otherwise the non-drive side cup may unscrew-itself.
    Make mine an Italian, with Campagnolo on the side..
  • Benjamin2020
    Benjamin2020 Posts: 22
    Sorry to drag up an old thread but is medium loctite the blue kind? Cheers

Categories