Advice on switching Hope brakes from Rockshox to fox forks

alanp1984
alanp1984 Posts: 61
edited October 2011 in MTB workshop & tech
Hi all.

I am looking to switch a set of hope tech v2s FROM a Santa Cruz Blur LT2 with a rockshox revelation TO a Lappierre Zesty 514 with a fox Float 32.

Both Hope F + R discs are 183mm standards (not vented).

1)What Hope brake adaptor will I need for the front?

2) I'm assuming the rears will be a simple switch over, looking at them. Is that right?

3) I am doing visa versa with the Formula Rx1's from the zesty to santa cruz. Any ideas what mount I'll need for that switch (standard discs that came with the zesty)


Cheers in advance for your help

Comments

  • nicklouse
    nicklouse Posts: 50,675
    just use the same adaptors if the fork fitting are the same.

    or if not then one to suit the fitting on the fork.

    both forks could have either fitting as you provide so little info.

    have a look in the FAQs for more info on brake mounts.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories