Brake mount
ste13
Posts: 6
Need some help. Just got an old hope mono mini No:3 and it doesn't fit the mounts on my rockshox pike forks. Any one have any ideas?
0
Comments
-
Are the forks post mount or IS, similarly is the brake IS or post?
http://www.bikeradar.com/forum/viewtopic.php?t=15909190 -
-
the forks are IS as is the brake0
-
In which case what size rotor are you trying to run, may just need an adaptor.0
-
its a 185mm0
-
Pictures would help.I don't do smileys.
There is no secret ingredient - Kung Fu Panda
London Calling on Facebook
Parktools0 -
0
-
You'll most likely need an adaptor for it then to fit a 185mm rotor then.
Take a look on merlin cycles in their brake spares, should have one at a reasonable price.0 -
for 185mm it should just bolt straight on. The pike had a 180mm is mount and the 5mm shouldn't make too much difference.0
-
the bolts on the brake are to small. the diameter is wrong0
