Bar end brake lever for narrow diameter bar?
yocto
Posts: 86
Hi,
I want to fit a bar end brake lever on a Soma Lauterwasser handle bar http://store.somafab.com/solahacr.html
but have found that the ends are quite narrow. Was unable to fit the Tektro RX4.1 http://www.tektro.com/_english/01_produ ... rt=1&fid=3
Trying to measure the internal diameter it looks to be about 18.5mm. Having a look on the interweb, for a lot of inverse brake levers the internal minimum diameter is not stated, and when it is, it’s usually 19mm or greater.
Can anyone recommend something that might fit? Also, the cable needs to be externally routed.
Many thanks
I want to fit a bar end brake lever on a Soma Lauterwasser handle bar http://store.somafab.com/solahacr.html
but have found that the ends are quite narrow. Was unable to fit the Tektro RX4.1 http://www.tektro.com/_english/01_produ ... rt=1&fid=3
Trying to measure the internal diameter it looks to be about 18.5mm. Having a look on the interweb, for a lot of inverse brake levers the internal minimum diameter is not stated, and when it is, it’s usually 19mm or greater.
Can anyone recommend something that might fit? Also, the cable needs to be externally routed.
Many thanks
0
Comments
-
Diacompe 188 reverse levers come with 2 sleeves for regular and skinny barsMake mine an Italian, with Campagnolo on the side..0
-
Monty Dog wrote:Diacompe 188 reverse levers come with 2 sleeves for regular and skinny bars
Super. Thanks
0
