Pedal help
woodytitan
Posts: 163
Bought a pair of Wellgo V1's off Ebay and after two rides i'm getting a continuous clicking from the left pedal, would this be the bearing??? Only done 17miles on them!
'11 Cannondale Trail SL3
0
Comments
-
New or used? take it off and see if the axle is loose.0
-
New mate, being a newbie to all this is it a case of whipping of the rubber cover at the end??'11 Cannondale Trail SL30
-
Before you get that far just pull your pedal there shouldn't really be any play (a fraction) if it does your axle has worked loose.0
-
What would the solution be if thats the case??
Appreciate the help, gonna get the Lidl workstand out tonight!!'11 Cannondale Trail SL30 -
Did you apply a little anti-seize grease on the thread before you fitted the pedals?
Take it the noise was not present before the new pedals?0 -
Have you checked to see if the pedal has worked loose in the crank arm?0
-
1mancity2 wrote:Did you apply a little anti-seize grease on the thread before you fitted the pedals?
Take it the noise was not present before the new pedals?
No I didn't and realised I probably should have, and no the old cheapo plastic pedals didn't do it...'11 Cannondale Trail SL30 -
Pop them off apply a little grease do them up nice and tight, see if that cures the noise.0
-
Cheers guys will try this. Ta'11 Cannondale Trail SL30
-
Cheers guys will try this. Ta'11 Cannondale Trail SL30
-
Have greased her up and will take her for a spin in the morning, pedals felt secure when on no give when attempting to move them.'11 Cannondale Trail SL30
-
If all is solid and noise is still there could be the bearings, take her out and let us know.
0 -
Will do mate!'11 Cannondale Trail SL30
-
Took her out Tuesday evening and went like a dream so looks like the grease has done the trick, thanks for the help appreciated.'11 Cannondale Trail SL30
-
