Which replacement bearing?
patchesuk2
Posts: 39
Evening,
I've recently stripped my iron horse sunday team down for a custome spray job. Unfortunatley I wrecked a bearing in the headset during removal:
Orbit IS-2 With E-Thirteen Reducer Cup
on the bearing casing it reads : th industries 1-1/8"
ACB 36x45 873#
Will any 1/18" bearing do? e.g:
http://www.chainreactioncycles.com/Mode ... elID=11266
Thanks for any help!
Clint.
I've recently stripped my iron horse sunday team down for a custome spray job. Unfortunatley I wrecked a bearing in the headset during removal:
Orbit IS-2 With E-Thirteen Reducer Cup
on the bearing casing it reads : th industries 1-1/8"
ACB 36x45 873#
Will any 1/18" bearing do? e.g:
http://www.chainreactioncycles.com/Mode ... elID=11266
Thanks for any help!
Clint.
0
Comments
-
th industries 1-1/8" ACB 36x45 873 is what you need.
is the link for a 873 bearing? if not then youi may find it it too tall or too short."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
the lin is to an 872.... what do you think about this one:
It's cane creek but says its for an IS2... am I right ot think that this will do?0 -
an 872 is not the same as a 873.
all the dimensions can be found in the FAS headset book."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Ooops... forgot to add the link:
http://www.chainreactioncycles.com/Mode ... elID=11266
pretty sure that this should do it... pearce cycles has it down as fitting the e13 recuder cup.0