Tools / parts needed for m775 XT hub service

DodgeT
DodgeT Posts: 2,255
edited June 2011 in MTB workshop & tech
Going to attempt to service the hubs, so, before I do it would just like to double check everything i'll need..
They are M775 with 20mm front, QR rear.

Got the appropriate BB tool and freewheel tool to remove the centre lock adaptors.
Take it I will need
28mm cone spanner and 32mm headset spanner (according to Park) for the front
5mm and 14mm allen key, 17mm cone spanner for the rear
3/16 bb's if needed & some grease
Will I need a chain whip for the cassette, or can you improvise something easily?

Is there anything else I should have around me before starting?

TIA.

Comments

  • nicklouse
    nicklouse Posts: 50,675
    why 14mm allen key? are you replacing the freebody?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • DodgeT
    DodgeT Posts: 2,255
    No, just want to fit new grease, replace any worn bearings. I picked the 14mm key bit up from a tech doc, must of misunderstood.

    So I take it just the 17mm cone spanner will do?

    Ta.
  • nicklouse
    nicklouse Posts: 50,675
    yep and the 5mm allen key.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • DodgeT
    DodgeT Posts: 2,255
    Cool, thanks for your help :D

Categories