SLX double crankset. - Compatible mech and shifter?

sarkmeister
sarkmeister Posts: 142
edited June 2011 in MTB workshop & tech
Hi

I'm currently attempting to build up a Lapierre Spicy 316 and need some help regarding matching the front mech and shifter to the chainset I have got (Shimano SLX double).

The frame already has a SLX front mech attached, and I have a Sram X7 shifter which was used with a triple chainset on my last bike.

Is it possible to use either of these with the double chainset?

I'm assuming I can use the derailleur, but will need to buy a need shifter?

Or can I just use them as they are and not shift into the top gear as it doesnt exist?

Any help would be brilliant, thanks.
Orange Crush 2010
Trek 1.5c

Comments

  • nicklouse
    nicklouse Posts: 50,675
    you can use the shifter as well.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • sarkmeister
    sarkmeister Posts: 142
    Thanks

    Is there any way to make it so I can't accidentally shift into the none existent top gear?

    Maybe setting the limits?
    Orange Crush 2010
    Trek 1.5c
  • nicklouse
    nicklouse Posts: 50,675
    well if you set the nmech correctly (as per any other mech) there is no issue.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • cooldad
    cooldad Posts: 32,599
    Set the limit screws to block out the third click and it won't shift too far.
    I don't do smileys.

    There is no secret ingredient - Kung Fu Panda

    London Calling on Facebook

    Parktools
  • sarkmeister
    sarkmeister Posts: 142
    Thanks. I thought that might work. I'll give it a go when I get the chainset installed (stupid bl00dy press fit bottom bracket)
    Orange Crush 2010
    Trek 1.5c
  • paul20v
    paul20v Posts: 267
    You will have no issues
    thats exactly how i run .

Categories