Dual ring.

widge34
widge34 Posts: 900
edited June 2011 in MTB workshop & tech
I,m considering going to a dual ring from a triple. I was thinking about removing outer ring and repacing my 32t middle ring with a 36t ring.
The rear mech is a 9 speed shimano xt cassette the front chainring is shimano deore.
Would there be a problem replacing the middle ring with another shimano 36t ring?
----
Widge.

Bird Zero 2
Trek Madone 3.5c H2 2013

Comments

  • sniper68
    sniper68 Posts: 2,910
    Nope 8)
    So long as it's 4 bolt you'll be reet 8) Any Shimano 36T will fit.You'll just have to adjust your front mech.
  • widge34
    widge34 Posts: 900
    Is it ok to carry on using the front mech. I am also considering a bash guard
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • sniper68
    sniper68 Posts: 2,910
    widge34 wrote:
    Is it ok to carry on using the front mech. I am also considering a bash guard
    Yes you just have to adjust it so it won't go far enough to throw the chain off 8)
    Bash would be a god investment also.
  • widge34
    widge34 Posts: 900
    Thanks ibbo.
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • widge34
    widge34 Posts: 900
    Does it matter if the largest ring is 36t but the bash guard is 40t size?

    Also is it ok to have a 36t next to a 22t ring?

    Sorry but not very tech minded when it comes to bikes.
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • sniper68
    sniper68 Posts: 2,910
    I have a 22T/36T set up.It's pretty much standard for a D&B.40T bash will be fine,not a lot of difference all it's doing is protecting the chain etc.Make sure you get an E-Thirteen supercharger as I have an SLX which is a bit fragile.Also a chain guide like a Blackspire stinger is a good addition if you have ISCG tabs on your frame.
  • widge34
    widge34 Posts: 900
    I have the shimano deore hollowtech fitted. See link. Concerned that the pedal arm will not fit onto smaller ring

    http://www.bikester.co.uk/bicycle-parts ... 7301_&c=18
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • sniper68
    sniper68 Posts: 2,910
    If you remove the big ring you'll need shorter bolts.Bash rings come with bolts.The Pedal arms are the same as LX/SLX/XT/XTR you'll have no problem.
    I've got a Deore on a HT I'm building and I'm removing the outer ring and replacing it with a bash.
  • widge34
    widge34 Posts: 900
    Ok thanks mate, you been a great help.
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • widge34
    widge34 Posts: 900
    Was thinking of going for this bash guard.

    http://www.chainreactioncycles.com/Mode ... elID=12167
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • sniper68
    sniper68 Posts: 2,910
    As good as owt else 8)
  • widge34
    widge34 Posts: 900
    Would i need to shorten the chain?
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • nicklouse
    nicklouse Posts: 50,673
    yes
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • widge34
    widge34 Posts: 900
    Is this easy enough to do? And how much would i have to shorten it by?
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • nicklouse
    nicklouse Posts: 50,673
    around the two big cogs and add a link.

    see Parktools.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • widge34
    widge34 Posts: 900
    nicklouse wrote:
    around the two big cogs and add a link.

    see Parktools.

    Iff i add a link that makes the chain longer????
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013
  • widge34
    widge34 Posts: 900
    Correct me if i'm wrong. If my chain is fine running on my middle ring which is a 32 t then surely it will be fine if the 32t ring is changed to a 36t
    ----
    Widge.

    Bird Zero 2
    Trek Madone 3.5c H2 2013