Crankset removal
Genesis Core 20
Posts: 81
Hi,
I am a beginner and im working on a singlespeed project. The bike is rather old and therefore has an odd crankset :?
This is what it looks like..
How do i remove this all together?? Any help or suggestions greatly appreciated.
Thanks
I am a beginner and im working on a singlespeed project. The bike is rather old and therefore has an odd crankset :?
This is what it looks like..
How do i remove this all together?? Any help or suggestions greatly appreciated.
Thanks
0
Comments
-
see the article on Parktools. One piece crank removal.
http://www.parktool.com/blog/repair-hel ... et-service"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Thank you very much. Well i be able to fit a normal crankset after i remove this one?0
-
no. but with a reducer you could.
it should be BMX size."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
The thing is im wanting to convert it to single speed and now ive found that it has a free wheel instead of a cassette and that it has a one piece crank arm..
Any ideas on how to convert this to single speed?0 -
new wheel or redish the current one and play with the axle spacing. note the OLD will be 126 or 130mm
fit a BMX chain wheel to the cranks instead of the two ring set up."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
0
-
yes but way too small."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0
