Hope 6Ti post mount bracket

gtd.
gtd. Posts: 626
edited March 2011 in MTB workshop & tech
Does any one know what size disc is needed for a front 6Ti caliper and the hope post mount bracket?

or could I use the Hope PM to IS 20mm+ adapter and the IS 205 adapter with a 225mm disc or would that be a total bodge?
Mountain: Orange Patriot FR, SubZero & Evo2LE.
Road: Tifosi Race Custom.
Do it all bike: Surly Disc Trucker 700c/29er

Comments

  • nicklouse
    nicklouse Posts: 50,675
    205mm

    and no you have to use the Ti adaptor.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • gtd.
    gtd. Posts: 626
    So I'll need a Hope Mono 6Ti 74mm Postmount bracket
    hope-6ti-brk-med.jpg
    and a Hope PM To PM Mount C adapter
    hope-step-up-mounts-med.jpg
    to run a 225mm rotor

    Was planning to use a Mono 6Ti IS bracket that is for a 205mm disc and use a Hope 74mm Post Mount to IS 20mm adapter that I bought to fit my old Mono M4
    hope-74mm-adaptor-med.jpg
    which adds 20mm so fits the 225 disc that came with the brakes.
    Mountain: Orange Patriot FR, SubZero & Evo2LE.
    Road: Tifosi Race Custom.
    Do it all bike: Surly Disc Trucker 700c/29er
  • nicklouse
    nicklouse Posts: 50,675
    top bit ok.

    bottom bit it all depends on the Mono M4 caliper number.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • gtd.
    gtd. Posts: 626
    Cheers it works with just the Hope HBSM20H Front IS to Post +20mm adapter with the front 205 IS Mount.
    IMAG0040-1.jpg
    Mountain: Orange Patriot FR, SubZero & Evo2LE.
    Road: Tifosi Race Custom.
    Do it all bike: Surly Disc Trucker 700c/29er

Categories