Single speed chain selection

monster-mash
monster-mash Posts: 586
edited March 2011 in MTB workshop & tech
Anyone confirm the correct chain type for a SS conversion useing a 32 ring raceface crankset (origanal 9s) and 16t rear sprocket mounted to a full sus using simple rear chain tensioner.

Been told I need a 3.32 chain could do with confirmation as these seem to twice the price of a 1/8 chain. Maybe its a strenght thing.

Finally do hope pro 2s ask for a specific SS coverter on their hubs? Anyone know
Alloy freehub body

Thanks :)

Comments

  • redvee
    redvee Posts: 11,922
    when I had a SS MTB I had a 1/8" chainring & 3/32 sprocket and ran a 3/32" chain with no issues. The only time I lost the chain was when I ran the bike too early and used a casette sprocket instead of the proper SS sprocket. With alloy bodied freehubs you need a 7mm sprocket, anything less and you'll cut into the freehub body.
    I've added a signature to prove it is still possible.
  • nicklouse
    nicklouse Posts: 50,675
    you can use any. as long as it fits the rear cog.

    by 7mm redvee is referring to the foot of the cogs width. or a steel body from Hope.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • monster-mash
    monster-mash Posts: 586
    Yeh I agree may look for a wider 7mm version don't thnk they are that expensive.

Categories