Enduro SL
gwRetro
Posts: 2
Hi all, hope you can help with a bit of advice.
I want to fit a chainguide/bashguard to the existing chainset on my 2008 enduro sl expert, its currently got the standard 'custom' M762 XT crank with 3 chainrings, but
TBH because of the different sizes not sure what I should be looking at or where I should start !!! (apart from liking the eThirteen stuff!!)
Many thanks in advance for any pointers/info.
I want to fit a chainguide/bashguard to the existing chainset on my 2008 enduro sl expert, its currently got the standard 'custom' M762 XT crank with 3 chainrings, but
TBH because of the different sizes not sure what I should be looking at or where I should start !!! (apart from liking the eThirteen stuff!!)
Many thanks in advance for any pointers/info.
0
Comments
-
I have an SLX double and bash and a Blackpire Stinger on my SL.Just make sure you get one that it ISCG mounted and not ISCG05.They are very slightly different and although with filing the ISCG05 will fit it's a lot less hassle to just get the correct fitting.0
-
I've got a superstars double chain thingy on my 08 enduro. Took the outer chainring off and bought a bashring instead too. Got a clear FSA cheap from CRC i think.
Ibbo, did you have any trouble getting your stinger to clear the tyre/chainstay? My superstars thing is very, very close, and the bolt on the back holding the roller almost touches the tyre. Is this normal? Or should I have bought a better chain guide?http://farm8.staticflickr.com/7231/6933696372_603c9ce220_b.jpg
http://farm6.static.flickr.com/5220/5458655980_a4baa7e6e1_b.jpg
http://www.flickr.com/groups/mbuk Join and add your pics.0 -
My Stinger is nowhere near either tyre or chainstay.The gap behind the roller is about 25-30mm.:-
As you can see from the next photo the roller sits just forward of the tyre.
Can't you alter the position of the SS guide?Have you BB mounted or used the ISGC mounts?0 -
mine was ok too i didnt bother with the bash (i havent on the bionicon either) which gave extra clearance:
0
