rockshox monarch 4.2 mounting hardware

huytonhead
huytonhead Posts: 160
edited February 2011 in MTB workshop & tech
just a quick one,
i have a 2007 enduro elite with a fox dhx 4 on, i have just purchased a rockshox monarch 4.2 to replace it but i don't know what mounting hardware to order can any of you guys help?

Comments

  • nicklouse
    nicklouse Posts: 50,675
    the one for your bike.

    what options have you got?

    measured your old ones?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • huytonhead
    huytonhead Posts: 160
    http://www.tredz.co.uk/.Rockshox-Rear-S ... _41207.htm

    ther is the options i think if you wouldn't mind having a look!
  • nicklouse
    nicklouse Posts: 50,675
    measure your pin 6 or 8mm and measure the width of your kit as fitted. for the other dimension.

    eg 1/2 x 1/2inch (24.4 x 6mm) is 24,4mm wide and has a 6mm pin.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • gtd.
    gtd. Posts: 626
    RS Vivid and Monarch use the same 1/2"x1/2" mounting eyelets as Fox and 5th Element

    I ended up using Fox mounts on my carrera when fitting a Monarch 3.2 and when I changed to an Orange Patriot frame I reused the hardware from the Progressive Suspenions 5th Element coil shock
    Mountain: Orange Patriot FR, SubZero & Evo2LE.
    Road: Tifosi Race Custom.
    Do it all bike: Surly Disc Trucker 700c/29er

Categories