Fox forks problem
coopsman1
Posts: 337
I just finished changing the wiper seals and oil in my 2009 Fox 32 RLC. When I put it back together the rebound and lockout lever does not work :shock: .
The lockout lever can move up and down even when I have installed the rebound knob. I f I screw the rebound down too tight I have no adjustment what so ever.
Anyone help me please?
The lockout lever can move up and down even when I have installed the rebound knob. I f I screw the rebound down too tight I have no adjustment what so ever.
Anyone help me please?
0
Comments
-
Re. fit the lockout lever be careful aligning the three balls that the lever locates and runs on.
The rebound cart will need bleeding too so put the fork on full slow rebound and pump 10/20 times to purge the air out.Suspension servicing, tuning, parts, setup and race support
Locotuning.co.uk0 -
Ok I have done that and the lockout lever has some up down movement. It can jump of the nut it slides onto.0
-
I remeber reading a thread like this a little while ago and I thought the problem was down to a seal being the wrong way round. Have a search around google as the answer is out there.0
