Chain slipping
Finlab6
Posts: 127
Old MTB in process of becoming a commuter. Bought a new chain and fitted it today. Havent been on this bike for years. Cycled up and down a hill no bother but on the flat the chain felt like it was slipping. Checked and listened to rear derailleur on a workstand and gear changes are all fine. No delay and no chattering. I havent replaced the cassette. I wonder if it's worn causing the chain to slip. Is that likely?
0
Comments
-
Yes! They wear together; some people prolong the life of the parts by swapping a few chains around on the same cassette (on the premise that a chain costs less than a new cassette).- - - - - - - - - -
On Strava.{/url}0 -
Sounds like you need a new cassette ( gears) as well , they wear with the chain and if they get worn to much then anew chain will not match to wear and jump under pressure, i had the exact same problem.
article..
http://cyclinginfo.co.uk/blog/bike-main ... placement/
You need to check if its the newer cassette or the older freewheel with the he hub built in ...
old
newFCN 3/5/90