Noisy chain

seagulljez
seagulljez Posts: 139
edited December 2010 in Workshop
Recently fitted a KMC 10sp Chain, and it is noisy as hell.
Checked the length off the old one, tried different cassettes etc, but can't figure it..
Help please..!
63 miles to go and the break is up the road

Comments

  • Philcho
    Philcho Posts: 57
    perhaps daft question but you have lubed it properly right? and it isn't slipping anywhere?
    MTB
    Project
  • seagulljez
    seagulljez Posts: 139
    It was brand new, and I have now lubed it a bit more.
    Would it be a fussy over being used with a not new cassette..?
    Don't think it is slipping, just seems to be very notchy and noisy...
    63 miles to go and the break is up the road
  • rake
    rake Posts: 3,204
    seagulljez wrote:
    It was brand new, and I have now lubed it a bit more.
    Would it be a fussy over being used with a not new cassette..?
    Don't think it is slipping, just seems to be very notchy and noisy...
    most likely because its on a slight worn cassette. it should settle down provided the cassette is not too old.
  • markyone
    markyone Posts: 1,119
    What is it shimano or campag?
    Colnago c60 Eps super record 11
    Pinarello F8 with sram etap
  • dodgy
    dodgy Posts: 2,890
    How many miles on the cassette? Did you change the chain before it was worn by measuring it?
  • seagulljez
    seagulljez Posts: 139
    to be fair, I have changed plenty of chains before and not had a problem so this problem is new to me,
    The cassettes aren't that old, and changed the chain on my other bike at the same time and not had any problems, so a bit flumexed..!
    Shimano 10sp Ultergra gears on a tt bike.
    63 miles to go and the break is up the road

Categories