forks for Anthem x3

xterra
xterra Posts: 117
edited December 2010 in MTB buying advice
Hi All
im looking to upgrade my forks to 120mm...

i have 2 questions..

1. will any 120 fork fit or are there limitations, technical requirements etc..

2. Any recommendations on a good 120mm fork :-)

thanks...

Comments

  • thel33ter
    thel33ter Posts: 2,684
    You will need a standard 1/18th steerer, just check the length before you buy.

    Budget?
    And now you know, and knowing is half the battle
    05 Spesh Enduro Expert
    05 Trek 1000 Custom build
    Speedily Singular Thingy
  • coxy17
    coxy17 Posts: 401
    2011 sid with 120mm
  • xterra
    xterra Posts: 117
    budget £500-700, but hopefully can get something in the sales...
  • xterra
    xterra Posts: 117
    and sorry to be a complete muppet, what do you mean by check the length?? :?
  • thel33ter
    thel33ter Posts: 2,684
    xterra wrote:
    and sorry to be a complete muppet, what do you mean by check the length?? :?

    If you are buying a discounted fork, it might have been originally specced for a bike, so the steerer tube (being measured here) may be cut down, and too short to clamp the stem on.

    measure-steerer.jpg
    And now you know, and knowing is half the battle
    05 Spesh Enduro Expert
    05 Trek 1000 Custom build
    Speedily Singular Thingy
  • Which year X3 do you have? If it has a Rock Shox Reba (2009) you can remove the internal spacer from the fork to extend it to 120mm..
  • baba123
    baba123 Posts: 235
    i would say the f120 from fox is worth a shout preferably the 2011 if you can find it in the price you want
    mongoose amasa elite 08
    giant anthem x4 10
  • xterra
    xterra Posts: 117
    frogstomp wrote:
    Which year X3 do you have? If it has a Rock Shox Reba (2009) you can remove the internal spacer from the fork to extend it to 120mm..

    its a 2010, fox fork..
  • xterra
    xterra Posts: 117
    thel33ter wrote:
    xterra wrote:
    and sorry to be a complete muppet, what do you mean by check the length?? :?

    If you are buying a discounted fork, it might have been originally specced for a bike, so the steerer tube (being measured here) may be cut down, and too short to clamp the stem on.

    measure-steerer.jpg

    thanks - i was being a muppet :-)