Bottom Bearing Fitment
christurbo
Posts: 432
Hi guys
I want to swap the chainset and BB from my Spesh XC Expert 2009 to a Spesh Enduro Expert 2004.
The specs off The website are as follows:
XC: Shimano BB-ES25, Octalink spline, 68mm x 118mm, I measured chainline at 50mm chainline.
Enduro: Shimano ES-30 Octalink spline, 68mm shell, 121mm spindle. 50mm
Will it work???
Links to Xc:
http://www.specialized.com/gb/en/bc/SBC ... spid=40121
Link to Enduro:
http://specialized.com/gb/en/bc/SBCBkMo ... nuItemId=0
I want to swap the chainset and BB from my Spesh XC Expert 2009 to a Spesh Enduro Expert 2004.
The specs off The website are as follows:
XC: Shimano BB-ES25, Octalink spline, 68mm x 118mm, I measured chainline at 50mm chainline.
Enduro: Shimano ES-30 Octalink spline, 68mm shell, 121mm spindle. 50mm
Will it work???
Links to Xc:
http://www.specialized.com/gb/en/bc/SBC ... spid=40121
Link to Enduro:
http://specialized.com/gb/en/bc/SBCBkMo ... nuItemId=0
0
Comments
-
Both bikes probably have the same chainline, so I don't see any reason why it'd not work...0
-
I ran mine (02 frame same spec) with a square tapper BB for ages before switching to Hollowtec II
Shimano Bottom Bracket Square Taper UN54 - 68-113mm
no problems, so it should work fine0 -
-
Guys thanks a lot for the assistance!
0
