Deore Triple to Single
submityournentries
Posts: 912
hey guys. i have a deore triple crankset. i never use the big or little ring, so was just gonna ditch them, but i have no money, so is that possible with this chainset?
http://www.chainreactioncycles.com/Mode ... elID=40496
thats the set btw.
http://www.chainreactioncycles.com/Mode ... elID=40496
thats the set btw.
0
Comments
-
Yeah, no bother. Just unbolt the inner ring completely for one. When you remove the big ring (or middle, whichever it is you want to lose) you'll probably find that the bolts won't tighten up as they're too long, so if that's the case you'll want either shorter bolts or some spacers (£10-ish either way or find some washers the right size). But if you want to do it on absolutely zero budget you can, just cut up the leftover ring- the 4 "stubs" where it bolted to the crankset can be recycled into crank spacers.Uncompromising extremist0
-
yes but you will need to shorten the female chainring bolts."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
I used some cheap M12 washers (about 5p each) and ground off one side so they would sit on the spider and used unmolested bolts.
Use the front mech (without cable/shifter) locked off on the stops as a cheap chain guide.
SimonCurrently riding a Whyte T130C, X0 drivetrain, Magura Trail brakes converted to mixed wheel size (homebuilt wheels) with 140mm Fox 34 Rhythm and RP23 suspension. 12.2Kg.0 -
right, as a continuation of this, could i take the big ring off, and replace it with this?
http://www.chainreactioncycles.com/Mode ... elID=31148
and would that then mean, i dont need to do anything different with the bolts, thats just a straight swap with the big ring?
thank you guys0