Coyote DH2
littlefella
Posts: 13
I am re-building an old Coyote DH2 but having a few problems. First of all please forgive my lack of bike brain. I cant get the two pedal arms off of the bottom bracket,i have tools for this type of job but no thread inside to pull them off(if that makes sence). The other problem is i cant get the female bolt out that hold in the swinging arm to the frame , one side has come out but not the other. Any takers Cheers.
0
Comments
-
What cranks are they?0
-
Sorry i have no idea but trying to find out but i have never come across this type before. You use a 10mm allen key to first get the bolt out which is very short but wide with a rubber washer on it. Then looking inside i cant see how to pull the pedal arms (cranks?) off0
-
No names on the crank, model numbers? Look on the back of the arms too.
Or post a few pics here.0 -
sounds like it has self extracting bolts.
read Parktools or post up pictures."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0