Still a frame(!) - but it's getting there - more pics added.

LardLover
LardLover Posts: 676
edited March 2010 in Your road bikes
Hehehe, just received my frame back from being tarted up a little. Sorry for the crap pics, had to use the sh1te camera on my iphone :(

It will be built up with:

3T Funda Team forks (in white)
3T Team ARX stem, Doric post and Rotundo bars
Prologo Scratch Nack
10 speed Campag Record (except cranks)
Rotor Agilis cranks
Chris King BB
Tune hubs on Schwarzbrenner carbon clinchers

(and now I have no money, negative money infact :oops: , but I have a HHHUUUGGGEEE grin on my face :wink: )

Roll on spring time. This baby is going to get some SERIOUS buffing over the winter :oops:

nyuyjt.jpg

mkzrli.jpg
«1

Comments

  • Anonymous
    Anonymous Posts: 79,667
    Oh my...

    This has the potential to be Bikeradar's nicest bike...
  • Thanks NapoleonD, I'm really only after one of your badges, but, not having a garage door I feel I may be lacking :(

    This bike is going to look nice (imho of course) however the same can not be said about it's owner (looks/talent/ability etc).

    All the gear, some idea, but no bleedin' ability is the phrase I like to use to describe myself.
    Is it wrong to appreciate the finer things? I think not.
  • wicked
    wicked Posts: 844
    LardLover wrote:
    Is it wrong to appreciate the finer things? I think not.

    It is most certainly not! Looking forward to seeing the build. 8)
    It’s the most beautiful sport in the world but it’s governed by ***ts who have turned it into a crock of ****.
  • redddraggon
    redddraggon Posts: 10,862
    Where do you get the Rotor Agilis from? Can't seem to find any UK stockists
    I like bikes...

    Twitter
    Flickr
  • Anonymous
    Anonymous Posts: 79,667
    Where do you get the Rotor Agilis from? Can't seem to find any UK stockists

    http://www.velotechservices.co.uk/acatalog/NEW_AGILIS_Cranks_&_Self_Aligning_Bottom_Bracket_.html
  • redddraggon
    redddraggon Posts: 10,862
    NapoleonD wrote:
    Where do you get the Rotor Agilis from? Can't seem to find any UK stockists

    http://www.velotechservices.co.uk/acatalog/NEW_AGILIS_Cranks_&_Self_Aligning_Bottom_Bracket_.html

    Meh, I'd rather get an SRAM Red cset for less :roll:
    I like bikes...

    Twitter
    Flickr


  • Meh, I'd rather get an SRAM Red cset for less :roll:

    Not for the price I got it for dude (inc rings) :wink: :shock: :wink:
  • Anonymous
    Anonymous Posts: 79,667
    LardLover wrote:


    Meh, I'd rather get an SRAM Red cset for less :roll:

    Not for the price I got it for dude (inc rings) :wink: :shock: :wink:

    Where'd you get it from?
  • From Velotech Services. It's this years model, they had some HEAVILY discounted (minus rings) to make way for the 2010 Agilis.

    Still, it's black and it's got a red spider. Nice 8)
  • APIII
    APIII Posts: 2,010
    Very, very nice.
    Glad to see 10 speed on the build list
  • upgrading to 11 once I've sold my kidney :wink:
  • LardLover
    LardLover Posts: 676
    It's slowly coming together, still waiting on my wheels, can't do any more until I get them :(

    Anyhoo, here's a few more pics, including the ones of djbarren's anodising skills (seatpost clamp and red headset spacer).

    PLEASE IGNORE SADDLE HEIGHT, it's only in there, to the minimum insertion line, as I don't want to risk scratching it putting it in too far before I can set the height properly :roll: :oops:

    2s0esjr.jpg

    vy192b.jpg

    k4uqhh.jpg

    ri80ll.jpg

    dwewjq.jpg

    mshac8.jpg

    29pb3wo.jpg

    6408xs.jpg
  • can we have a complete frame and bits shot rather thatn just the detail!
    stop with the tease!
  • redddraggon
    redddraggon Posts: 10,862
    I bet hes got no wheels
    I like bikes...

    Twitter
    Flickr
  • LardLover
    LardLover Posts: 676
    Pic of complete bike only when it's finished.

    And you're correct, I don't have any wheels, hence the "I'm still waiting on my wheels......."
    :wink:
  • APIII
    APIII Posts: 2,010
    Holy sh1t, that is shaping up nicely.
  • Anonymous
    Anonymous Posts: 79,667
    I stand by my initial comment...
  • redddraggon
    redddraggon Posts: 10,862
    k4uqhh.jpg

    Apparantly it's very bad to do that. But I reckon it's fine, you've clamped it sensibly, very little deformation of the rubber.
    I like bikes...

    Twitter
    Flickr
  • LardLover
    LardLover Posts: 676
    It's not really clamped, more resting on the clamp.

    :D


    A couple more, excuse the quality (lack of! :oops: ), I'm supposed to be decorating (hence the scaffolding plank you can see in the background - reaching to very bits at the top of the stairs), had to do them quickly whilst the wife popped out.

    qovaz9.jpg

    28syj9z.jpg
  • Anonymous
    Anonymous Posts: 79,667
    I stand by my original comment.
  • LardLover
    LardLover Posts: 676
    Thank you.
  • LardLover
    LardLover Posts: 676
    djbarren wrote:
    Keep up the good work, and were not talking about the painting :wink:

    I've finished the stairs, landing and hallway dude, only the living room and kitchen left to do next week, then that'll leave the third week for me me me. Hope the weather's ok so I can get some miles in :D
  • stubee
    stubee Posts: 25
    I really like agilis cranks!! Yummy!!

    Stu
    Play for more than you can afford to lose.......then you will learn the game. (winston churchill)
  • ScottieP
    ScottieP Posts: 599
    I'm with NapD - this looks like it will be one of the nicest bikes on here.... Looking forward to seeing the finished bike..... keep up the great work!
    My cycling blog: http://girodilento.com/
  • LardLover
    LardLover Posts: 676
    Thank you please.

    One thing is for certain, this bike is going to show me up no-end :oops: !!! I'm going to have to do some SERIOUS training this winter...................................... :shock:
  • Droops
    Droops Posts: 204
    Sweet.
    Very nice attention to detail LL.

    I particularly like the way you've already got the wireless computer in place, so as not to waste a single moment when the build is road-ready. :lol:

    Looking forward to the final pics. Good luck.
    Droops.
  • Evil Laugh
    Evil Laugh Posts: 1,412
    Not really into the overused carbon/red/white thing but this is looking nice!

    It's the little details I think.
  • ronthechef
    ronthechef Posts: 943
    Neil has asked me to stick up a picture of his finished build
    finishedparlee.jpg
  • Anonymous
    Anonymous Posts: 79,667
    Grand stuff. How are the Tune wheels?