SRAM XO with XX mix ?
tomos
Posts: 41
Hi all
I am just building up my bike. I have ordered SRAM XO rear derailer, crank, casstette and shifters.
I have also ordered the XX front mech, will XO and XX play togther ok ? I dont like the look of the XO front derailer.
Thanx for any advice
I am just building up my bike. I have ordered SRAM XO rear derailer, crank, casstette and shifters.
I have also ordered the XX front mech, will XO and XX play togther ok ? I dont like the look of the XO front derailer.
Thanx for any advice
0
Comments
-
what shifters?
what Crank?
if you want three rings on the front then the XX will not be compatible."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Thank you for the advice
The rest of the set is per
http://www.sram.com/en/designyourride/
(Then click the small orange box )
So thats the XO rear derailer, cassette (pg990) XO TRIGGERS noir 3.3 crank
The only thing not from XO is the front XX derailer..
Thank you0 -
That's a three-ring crank so, as nick said, an XX front derailleur will not work with it. If you hate the X.0 mech so much, you might want to look at Shimano's offerings. SRAM drivetrains with a Shimano front derailleur are a fairly common mixture.0
-
Thank you both
Guess its either the X0 front derailer (which I can't find many good reviews for?) or a shimano front derailer, guessing the xtr is their top offering ?
Thx guys0 -
there is the new XX set."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
All done thx for the advice all
Ordered
XO rear derailer, cassette (pg990) and triggers with SRAM Noir 3.3 crank
and the hollow pin SRAM 991 chain. Now with the Shimano XTR front derailer..
Should be nice :P
Thx0