Which brake pads

andy83
andy83 Posts: 1,558
edited November 2009 in The workshop
Trying to get replacement brake pads for my shimano sora brakes on my trek 1.2 2009 but just getting baffled by the amount of differernt types

anyone recomend some off wiggle (getting order together)

thanks in advance

Comments

  • cjcp
    cjcp Posts: 13,345
    I don't know if you'd be able to use these tbh (anyone else know? looks like it should be possible):

    http://www.wiggle.co.uk/p/cycle/7/Shima ... 000000898/

    Although it looks like you have these:

    http://www.ribblecycles.co.uk/productde ... 0000000000

    or here:

    http://www.chainreactioncycles.com/Mode ... elID=17579
    FCN 2-4.

    "What happens when the hammer goes down, kids?"
    "It stays down, Daddy."
    "Exactly."
  • andy83
    andy83 Posts: 1,558
    they do look like what i need, thanks

    might just order some from chain reaction or ribble

    I really like the look of ribble bikes, might be my next purchase but need to save
  • N0bodyOfTheGoat
    N0bodyOfTheGoat Posts: 6,065
    Would Koolstop Slamons (pink) work with these calipers?
    ================
    2020 Voodoo Marasa
    2017 Cube Attain GTC Pro Disc 2016
    2016 Voodoo Wazoo
  • cjcp
    cjcp Posts: 13,345
    Hmmm, I don't *think* so from looking at them. Might be worth asking the question on the Wiggle site though.
    FCN 2-4.

    "What happens when the hammer goes down, kids?"
    "It stays down, Daddy."
    "Exactly."
  • sicknote
    sicknote Posts: 901
    You could do what I have done and get some new blocks and then get some Kool stop salmon blocks to go in them as they have had very good reviews on here.

    Just waiting for my kool stops to turn up. :wink:
  • andy83
    andy83 Posts: 1,558
    cheers for that

    hopefully going to order some tomorrow

    which exact pads will i need??
  • sicknote
    sicknote Posts: 901
    Shimano compatible blocks and pads like these will do the job.
  • andy83
    andy83 Posts: 1,558
    I think ive been a complete numpty and misunderstood your post

    ordered some of them pads but did i need the new blocks aswell or should they fit mine??

    Hopefully if i order some new blocks tomo they will get sent with my other stuff.

    as i say i have realised my back break pads are nearly completely dead, might swop the front ones over just for now so got at least some stopping power and i dont kill the rim on my wheel
  • sicknote
    sicknote Posts: 901
    andy83 wrote:
    I think ive been a complete numpty and misunderstood your post

    ordered some of them pads but did i need the new blocks aswell or should they fit mine??

    Hopefully if i order some new blocks tomo they will get sent with my other stuff.

    as i say i have realised my back break pads are nearly completely dead, might swop the front ones over just for now so got at least some stopping power and i dont kill the rim on my wheel

    Which blocks do you have?

    Like A or B

    If you have B, you will need new block with inserts and can get them with the Kool stop pads in like these but if you just need pads, get the ones from the link above.

    Hope that cleared it up for you :)
  • andy83
    andy83 Posts: 1,558
    ah i have the blocks like A so should be fine with the pads

    thanks for help

    had disc brakes before so little new to all these road bike rim brakers

Categories