Tools again (but specific to my bike ?)

182_blue

I have looked at the other tools thread, but dont want to end up with loads i wonnt need and be missing the things i do, so can anyone recommend me either a kit or just the bits (of kit + bits) i will need to take my spicy 516 apart, im thinking cranks, wheels, sprockets, and maybe even the Fox Talas too (well at least removing them from the bike so i can send them off) headset

the spec of the bike is below, what do you think

all help appreciated







Frame : ALLOY 7005 MULTIBUTTED HYDROFORMED OST 160 MM
Shock absorber : FOX FLOAT RP2 XV 216 MM
Fork : FOX 36 TALAS R
Headset : AHEAD SET 1.1 / 8 SEMI-INTEGRATED CARTRIDGE
Bottom Bracket : SHIMANO INTEGRATED CARTRIDGES
Crankset : SHIMANO XT FCM770 22X32X44
Stem : THOMSON ELITE X4
Seatpost : THOMSON ELITE 31.6X367
Handlesbars : EASTON EA70 MID 680 MM
Front derailleur : SHIMANO NEW SLX
Rear derailleur : SHIMANO XT SHADOW
Brakes : FORMULA ORO K24 180 / 180 R1 ROTORS
Shifters : SHIMANO NEW SLX
Saddle : LP BY SAN MARCO
Wheel : SHIMANO XT M776
Sprocket : SHIMANO HG61 9S 11X34
Tires : CONTINENTAL MOUNTAIN KING UST 26X2.40

heez29

Set of Allen keys lol

182_blue

:? :?

ride_whenever

good set of allen keys
hollowtech 2 wrench and preload cap (can get 1 tool for this)
torque wrench and bits
chain whip
cassette lockring tool and gigantic spanner to go with
cone spanners
spoke key
tyre levers
track pump

everything else is a lbs job really

182_blue

ride_whenever wrote:

good set of allen keys
hollowtech 2 wrench and preload cap (can get 1 tool for this)
torque wrench and bits
chain whip
cassette lockring tool and gigantic spanner to go with
cone spanners
spoke key
tyre levers
track pump

everything else is a lbs job really

thanks, are the cassette lockring and spanner generic, or do i need one specific to my bike ?

heez29

182_blue wrote:

ride_whenever wrote:

good set of allen keys
hollowtech 2 wrench and preload cap (can get 1 tool for this)
torque wrench and bits
chain whip
cassette lockring tool and gigantic spanner to go with
cone spanners
spoke key
tyre levers
track pump

everything else is a lbs job really

thanks, are the cassette lockring and spanner generic, or do i need one specific to my bike ?

Generic

nicklouse

any tool kit will do as per the other threads, there is nothing "special" about your bike.

182_blue

nicklouse wrote:

any tool kit will do as per the other threads, there is nothing "special" about your bike.

i didnt think or say it was special, i wanted tools to match the crankset etc

ride_whenever

you need a spanner that'll fit your lockring tool basically.