Fox 32RL'S

brett7
brett7 Posts: 53
edited August 2009 in MTB workshop & tech
Hi all, i've got a Cannondale rush carbon 4 that comes with the 32RL's my question is about the stanchions. I like to keep my bikes in tip top condition so what do i put on the stanchions after a good clean lube wise?

cheers.

Comments

  • Zeroman_IR
    Zeroman_IR Posts: 290
    I usually give them a spray of teflon lube, GT85 or similar, then compress the forks a few times to get muck out of the seals, wipe off and go.

    I've heard good reports of Fork Juice though, if you really feel the need to put something on them.
  • nicklouse
    nicklouse Posts: 50,673
    the problem with GT85 and similar is that it will dilute and possibly wash out the Float fluid in the Foam rings.

    best to use suspension fluid the same as is in the fork already.

    Info on cleaning the seals etc can be found here.

    http://www.foxracingshox.com/fox_tech_c ... OM_eng.htm
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Zeroman_IR
    Zeroman_IR Posts: 290
    :oops: I stand corrected :oops:

Categories