Rockshox Revalation Crush Washers
shamone
Posts: 55
Hi, I have 2008 Air U-turn Revalations and I've only done 100 miles and they are leaking oil from the botton of the damper.
Looking at all the posts on various forums it looks like I need a new crush washer. Does anyone know who sells these as google doesn't come up with anyhting in the UK.
Thanks Simon
Looking at all the posts on various forums it looks like I need a new crush washer. Does anyone know who sells these as google doesn't come up with anyhting in the UK.
Thanks Simon
0
Comments
-
The washers come in a kit with replacement bolts etc. I'm sure a copper washer with a 6mm centre would do the job. Try http://www.bitzforbikes.co.uk/-ref-12140-241.html assuming the bolt is 6mm. Check as you may need 8mm.
Also make sure that your rebound adjuster is still in position as these have a habit of falling out and allowing the small amount of oil in the bottom of the fork leg to drain out. If this is the problem then this http://www.chainreactioncycles.com/Mode ... elID=21941 has all the bits you need including the correct washer.0 -
Perfect - thanks0
