Marozocchi MX COMP ETA 2005

orangetom
orangetom Posts: 35
edited February 2009 in MTB workshop & tech
Just a quick question Does any one know the correct air pressure in PSI for a rider of 196 lbs in weight??? I've tried downlaoading the manual but couldn't find the air pressure table???? Or the Maximum pressure the fork will take Thanks Tom

Welcome!

It looks like you're new here. Sign in or register to get started.

Comments

  • nicklouse
    nicklouse Posts: 50,673
    what ever is needed to give you the sag you want.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Dirtydog11
    Dirtydog11 Posts: 1,621
    Hi Tom given your weight you probably would want to be running about 45 - 50 Psi . That should give you around an inch of sag.
  • nicklouse
    nicklouse Posts: 50,673
    page 35 of the 59 page manual.

    Please note that this is for the air spring side only as the ETA sid has a spring in it but you can add air to it to adjust the preload.

    max pressuse dont worry you will be under its settings
    again set it to give the sag you want. will be a different measurement if 105mm for or 120mm fork. 20-25% is good.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Welcome!

It looks like you're new here. Sign in or register to get started.