rockshox revelations

Paulkingk
Paulkingk Posts: 689
edited January 2009 in MTB workshop & tech
i have some revelations which have been faultless for the last year or so, However i went to adjust the positive air pressure today and as i removed the pump all the air leaked out this happened repeatedly so i got a valve core tool to tighten the shrader valve on top and it threaded. Now the valve core is just spinning :( . can i simply replace the shrader valve in to the top of the air spring or do i need a whole new positive air spring? also the clip on top snapped. :

Comments

  • nicklouse
    nicklouse Posts: 50,673
    Download 2008 ROCKSHOX SPC_95-4315-001-000_A_Reba_Revel_Pike from Srams webby but i think you need the following

    Part number 11.4311.387.000 Reba/Pike/Revelation/Recon Air Top Cap Kit

    But if it is a U turn (you do not say) then the bits come in a different service pack.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Paulkingk
    Paulkingk Posts: 689
    it is a u turn
  • nicklouse
    nicklouse Posts: 50,673
    part of a service kit part numbers can be found in the same documentation mentioned above.

    But i would sent the fork in for a service and a sort.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories