Shimano Disc Adaptors
scott79
Posts: 42
My Spark has got a 180 rotor on the front and I am trying to find a post to post adaptor to run a 160 rotor. I can't find a 160mm post to post adaptor anywhere, any ideas?
Thanks
Thanks
0
Comments
-
you do not need one. if the fork and caliper are post mount.
what fork."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
The fork is a 2008 Fox F100. The bike is 2008 Spark 20.
If I leave the existing adaptor on the rotor would not run in between the pads?0 -
0
-
remove the adaptor. non needed."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Wouldn't that mean that the caliper would sit too close to the fork and not allow enough room for a 160mm rotor?0
-
No, post mount is 160mm
have a read of the sticky in tech and look at the downloadable images at the bottom."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Ok, cool. Thanks for your help nicklouse0