Fox Float RP23 Rear Shock

robbiemagic
robbiemagic Posts: 132
edited September 2008 in MTB workshop & tech
I have the above fox rear shock, and when i adjust the setting between 1,2 and 3 by lifting the knob up, it sometimes doesnt click back into place correctly and I am unsure if it has come out of sync. So when it says it is on 2, it could be on 3 if you get me?! Is this possible or am i just worrying over nothing? :?
"Second place is the first loser"
Orange Five SE
Orange P7 one

Comments

  • Chobber
    Chobber Posts: 38
    Think you may be worrying over nothing. If the dial doesn't click back into place, move the blue platform lever from one side to the other and back. You should find the dial clicks into place.

    Chobber
    _______________________________________________
    Trek hardtail
    My new Beastie, a custom build Yeti 575
    And Chris Boardman Road Bike when I feel the need for speed instead of mud
  • robbiemagic
    robbiemagic Posts: 132
    Thats what i thought, cheers for that! :D
    "Second place is the first loser"
    Orange Five SE
    Orange P7 one
  • skyliner
    skyliner Posts: 613
    You should only turn it clockwise to adjust it. It doesn't engage properly if turned anticlockwise, but sometimes it just needs the lever to be in the correct position. i.e. in the "on" position.
    Hope this helps.
    It's nice to be important, but it's more important to be nice.
  • shin0r
    shin0r Posts: 555
    And don't forget the adjustment for each setting is in two parts, IE if you were going from 1 to 2 it's actually two clicks, one to disengage 1, then one to engage 2.

    See the bottom of this page:

    http://www.foxracingshox.com/fox_tech_center/owners_manuals/07/eng/rear_shocks/float_rp23.htm

Categories