marzocchi xc 600 tst2 air pressure?

hugh_b
hugh_b Posts: 93
edited September 2008 in MTB workshop & tech
Hey guy's, I have some marzocchi xc 600 tst2 forks arriving tomorrow and i've been looking at the online manual for the forks but it's not making much sense to me with regards to what air pressure to run. I weight 10.5-11 stone and ride aggressive xc/singletrack. Can anyone give me a guideline pressure to start with. from what i can make it out i need around 35psi mark?? thanks-Hugh

Comments

  • nicklouse
    nicklouse Posts: 50,673
    what ever you need to set the sag correctly.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • nicklouse
    nicklouse Posts: 50,673
    but for a guide
    Positive air
    pressure
    bar 2.00-2.75 2.40-3.10 2.90-3.80 3.60-4.50
    psi 30-40 35-45 42-52 52-65

    that is the bit you need. Table 7 Positive air
    pressure
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • hugh_b
    hugh_b Posts: 93
    much appreciated buddy :)

Categories