Melted Back Sprocket
The Wanderer
Posts: 3
don't know if this is the right place but it is on a MTB
as i am new here but have a problem
I used a blow torch on my six speed back sprocket to apply a bit of heat to help get it off the wheel hub (opps) now this is where the problem starts
as in between the sprocket seems to have melted as I have now found out that the different gears where spaced out with plastic spacers
So is it possible to buy these plastic spacers or do I have to buy a complete new 6 speed sprocket is my question
as i am new here but have a problem
I used a blow torch on my six speed back sprocket to apply a bit of heat to help get it off the wheel hub (opps) now this is where the problem starts
as in between the sprocket seems to have melted as I have now found out that the different gears where spaced out with plastic spacers
So is it possible to buy these plastic spacers or do I have to buy a complete new 6 speed sprocket is my question
0
Comments
-
You would need to dismantle the block (sprocket) which is not always easy. 6 speed screw on blocks are pretty cheap anyway, so I'd just get a new one.0
-
-
ok thanks for that where is a good cheap place to buy one online
as i'm in germanland so a European for my euros account would be better0 -
Some of the bigger Etailers use both funny money and real money, as to which is which depends on which side of the channel you're from
I've added a signature to prove it is still possible.0
