Rockshox Psylo XT

madmuppet
madmuppet Posts: 17
edited July 2008 in MTB beginners
Hi. I recently recieved a Marin XC Wolf Ridge with Rockshox rear (Sylo) and Rockshox front (psylo XT) i need to adjust the front but aint to sure how to do it. Can anyone please explain how i harden the front please?? The rear i sorted now.

Comments

  • nicklouse
    nicklouse Posts: 50,673
    http://www.sram.com/en/service/rockshox ... subcatID=7

    which year? coil or air? and what do you mean by harden?

    OK it should be a 2002 year fork? with coil spring and U-turn.

    to correct the sag you will need a new spring. to stiffen the rebound adjust the adjuster or get it services as the oil may be "dead".

    To make the fork "harder" a new fork.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • madmuppet
    madmuppet Posts: 17
    I assume there coil as i cant find a valve like on the rear shock. On top of the shocks there is a twist adjuster on the left side of the fork? Problem i have is it was set up originally for someone who weighs almost 7 stone i weigh considerably more (15 stone). So when im peddling the front is just dipping to much.
  • nicklouse
    nicklouse Posts: 50,673
    new spring is required then.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown

Categories