Stans No Tubes
eve12matt20
Posts: 37
i have my tyres filled with stans no tubes it say the solution will fill a gap upto a 1/4 of an inch. the solution just seemed to spray out of the hole no where near 1/4in all over me! any ideas on this or should i get a different solution.
0
Comments
-
why a new topic? would not the history in your earlier topic of this morning help?as the hole have been caused by a snake bite and is close to the bead.
you can try patching or replacing the tyre."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
yes i suppose it would have, i was trying to get a general feel for peoples views the stans no tube solution and thought a new topic would be better sorry0
-
-
i was on around 35 what do you think?0
-
over 40 I'v had problems with my specialised captains when sealing. 35 should work fine. The instructions say not to use 40+. Maybe try sealing it at a low pressure and then pump up later?
Plus maybe the quarter of a inch is the size of a hole caused by a quarter inch nail, not an actual quarter inch hole or tear, I mean thats about 6mm. I guess a hole caused cleanly by a nail would flap back in to a degree.My Ride Stumpjumper Expert 20080 -
i had the same problem but found that if i let the tyre go flat while spining it then i pump it up with no problem. I have no idea how they got away with the stuff in the stans videos0
-
Discopooh wrote:i had the same problem but found that if i let the tyre go flat while spining it then i pump it up with no problem. I have no idea how they got away with the stuff in the stans videos
A lot more sealent in the tyre than you would normally use probably.0
