Fitting Remote Lockout - Marzocchi MX Pro LO 2008

charliebarrow
charliebarrow Posts: 10
edited May 2008 in MTB workshop & tech
So my technical inability meant I took the new Marzocchi MX Pro LO to be fitted by my bike shop. Success!

I decided to try to set up the remote lockout myself as there were absolutely no instructions shipped with it and no help on web searches or Marzocchi site.

CAN ANYONE TELL ME THE CORRECT WAY TO SET UP REMOTE LOCKOUT?

1. The lockout is on the left side of the fork. Does it matter which side of the handlebars the LO lever goes?

2. Should the remote have been shipped with a plastic cable sleeve like brakes or gears? It wasn't.

3. Why does the lockout 'nozzle' on the forks revolve when you loosen the screws? Should it be facing forward. Its just that the unsleeved cable looks at an unnatural angle.

4. Anyon e know where to get a new 'nozzle' that sits on the top of the fork? I broke the incredibly fragile tab on the back that the little plastic civer sits on. It seems to act to keep dirt from where the cable attaches to the mechanism. I'm hoping it's more astheatic than anything. :oops:

Any help would be gratefully received. I'm frustrated that I managed to snap the LO within 3 hours of the forks being fitted. What a baffoon!

Thanks.