Removing a "Spin on" type freewheel ?

dirk_van_gently
dirk_van_gently Posts: 826
edited May 2008 in Commuting chat
Removing a "Spin on" type freewheel ?

Neighbour of mine, has a bike with one of the Spin on type freewheels, and basically needs to get it off, because the wheel needs replacing.

How is this done? I have a chain whip but can't see how that would help? if there some other special tool required?
If you see the candle as flame, the meal is already cooked.
Photography, Google Earth, Route 30

Comments

  • redvee
    redvee Posts: 11,922
    This sounds like a normal freewhell and just needs a freewheel tool locking into the splines and a big 'jussie' clamping onto the freewheel tool. Be warned that over time these things can be a bugger to get off as the action of pedaling will tighten the freewheel up. Keep the tyre on the wheel, get a friend to hold the wheel with a pair of gloves for better purchase and use an extension on the 'jussie'.
    I've added a signature to prove it is still possible.
  • whyamihere
    whyamihere Posts: 7,717
    Easiest way if you have a bench vice is to put the freewheel remover in the vice, then you can use the whole wheel as a lever to loosen it.
  • dirk_van_gently
    dirk_van_gently Posts: 826
    Thanks for the advise.

    I don't have a removal tool, and to buy one is almost as much as a Freewheel, so I think I'll recommend a new freewheel, could save a lot of time, especially if the freewheel is seized on.
    If you see the candle as flame, the meal is already cooked.
    Photography, Google Earth, Route 30

Categories