Juciy Carbon 160mm fitting onto Marzocchi MX Pro ETA 2007

theman1001
theman1001 Posts: 85
edited April 2008 in MTB workshop & tech
Right Ive got Avid Juicy carbon brakes on my bike at the moment which have 160mm rotors front and rear, but Ive just got some new Marzocchi mx pro eta forks which are post mount. The juicy calipers currently have a post mount to IS fitting on them as my current forks are IS. Do I need to buy an adaptor to fit the new forks or can I simply remove the one Im using at the moment? Therefore making it Post mount on the fork and Post mount on the caliper?

Comments

  • nicklouse
    nicklouse Posts: 50,675
    if 160mm disc then bolt it straight on. using the adjusting washers.

    did you look at the sticky?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • I have now read the sticky, thank you kind sir.

    Although 1 question, is there a way I can run at 185mm rotor if I wanted to with this caliper/fork combination?

    Or is is just a choice of 160mm or 203mm?
  • nicklouse
    nicklouse Posts: 50,675
    yes you can you get the extenders and longer bolts or get an adaptor.

    avid do 2

    11.5310.187.000
    CPS, 185 post Disc Brake
    Hardware Kit, Qty 1


    11.5012.868.000
    CPS, 185 post Disc Brake
    Hardware Kit Ti, Qty 1
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • Am I right in thinking its one of these bad boys Im after: http://www.chainreactioncycles.com/Mode ... elID=13717 ?

    Cheers.
  • nicklouse
    nicklouse Posts: 50,675
    yep that should do it.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • excellent, thanks for your help! :D