dripping lube

curlyrobert

I have been cycling for a number of years and have had mixed advice on the subject of lube.

I like to use white lightning dry lube on my road and mtb, and only try to ride when it is dry (laugh here).

When I need to repair friends bikes on route I often notice that their chains are really wet with black messy oil, which not only runs a little on their components, but also leaves residue on all everything it touches. This is true also from when their bike comes back from a lbs from a service.

I understand that the chain does need to be lubed to stop wear and be smooth, but how much is too much?

I don't like the mess and I suppose that is why I use white lightening, but I always read to remove excess lube once applied with a cloth.

Anyone offer any advice and recommend some good lube?

Nuggs

I do as you do - remove the excess with a cloth. You really only need lube in the rollers and links to keep things smooth.

You certainly don't need a chain that looks like the Exxon Valdez (sp?) has paid it a visit.

Good lube? I like Pedros Road Rash.

dennisn

Nuggs wrote:

I do as you do - remove the excess with a cloth. You really only need lube in the rollers and links to keep things smooth.

You certainly don't need a chain that looks like the Exxon Valdez (sp?) has paid it a visit.

Good lube? I like Pedros Road Rash.

I'll second that.

curlyrobert

How about degreasers too, is it worth paying top dollar for a branded degreaser or is the 2.99 jobby from CRC going to do the job?

campagsarge

I use Finish Line products, both the degreaser and also teflon lube. Used them for years, never had any recourse to try anything else.

Need to be careful when using degreaser though as it could damage the paint job on your frame if it comes into contact with it and is left for any period of time.

Only use a light amount of lube and I always wipe the excess off after lubing.