brake hoses
KONA DJ Martin
Posts: 37
i am confused about changing my brake hoses on my hayes stroker ryde disc brakes. Do I need to buy new connectors for the end of the hose or can I just pull the original hose off and use the old connectors? If I need to buy new connectors - which ones do I need because nowhere sells any connectors for Hayes stroker ryde disc brakes.
I would be grateful for any help
Thanks
I would be grateful for any help
Thanks
0
Comments
-
new hose new ends.
look at the caliper end!"Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
do you know which ends will fit?i think the hayes hfx mag might fit not sure0
-
ask the supplier of the hose as you need them to match the hose and the brakes."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
In a similar position myself with my new Stroker Trails.
Need to shorten the rear hose but there's nothing on Hayes webbysite and the instructions only refer to fitting,not trimming hose or bleeding (although bleeding looks much the same as HFXs to be honest).
There is an olive and another bit included,but I'm not willing to risk cutting it just to see..=========================================
Dot 4 in the eye hurts. Trust me0 -
You will need a new olive and bushing (unless its a combo one).
http://www.hayesdiscbrake.com/support_downloads.shtml
The info you need is on there, alternatively give Hotlines a bell on Monday.Brought to you by:
Trix©orp Industries
For everything & anything pointless0 -
Not sure if you were replying to me or the OP,but strokers (ryde,trail,carbon) aren't in that list.That's the first place I checked tbh.
Had a gander on Park too just on the offchance.
My apologies for hijacking the thread too,but I didn't want to start a new one for what is basically the same problem :oops:=========================================
Dot 4 in the eye hurts. Trust me0