hope 11 again ?

acac
acac Posts: 348
edited March 2008 in MTB workshop & tech
hi am abit stuck i just clean and regreased the rear hub pro11 went to put it together that was fine but the free rotor body dos not spin freely but it dos with out the top cap (spacer ) there is a washer that sits behind the rotor on the bearing is this in the right place any ideas ? thanks
play hard ride hard

Comments

  • nicklouse
    nicklouse Posts: 50,673
    acac wrote:
    hi am abit stuck i just clean and regreased the rear hub pro11 went to put it together that was fine but the free rotor body dos not spin freely but it dos with out the top cap (spacer ) there is a washer that sits behind the rotor on the bearing is this in the right place any ideas ? thanks

    the what?
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • acac
    acac Posts: 348
    what you meen the what ?
    play hard ride hard
  • nicklouse
    nicklouse Posts: 50,673
    what i have high lighted.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • acac
    acac Posts: 348
    the freehub body hope web sit calls it rotor i
    play hard ride hard
  • clarkson
    clarkson Posts: 1,641
    have you printed off the exploded diagram? im soon to be stripping mine and have prnted this off. and studied it!
    I said hit the brakes not the tree!!

    2006 Specialized Enduro Expert
    http://www.pinkbike.com/photo/3192886/

    2008 Custom Merlin Malt 4
    http://www.pinkbike.com/photo/2962222/

    2008 GT Avalanche Expert
    http://www.pinkbike.com/photo/3453980/
  • acac
    acac Posts: 348
    yes i hve but it dos not apeer to be the same it dos not show that washer?
    play hard ride hard
  • nicklouse
    nicklouse Posts: 50,673
    ok as normal hope renaming things.

    So this washer where is it? inboard or outboard? in relation to the free body.

    newly greased and refitted bearings can be stiffer.

    also make sure that the freebody to hub seal is correctly seated.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • acac
    acac Posts: 348
    the washer is inboard inbetween the freebody and the bearing
    i have not put new bearings in just clean and regreased
    the Cassette dos spin but not so freely as it did before
    with the bike upside down i pedal it
    then stop hold the cranks still let go them go the cranks go round by them selfs ?
    play hard ride hard
  • acac
    acac Posts: 348
    well seems to be sorted now the seal thats on the free body was not seated right and the top cap was not in all the way in thanks for your help
    play hard ride hard

Categories