brake hose holders
PJPenrouz
Posts: 136
Hi guys - I wonder if you could tell me where to get these plastic fiitings which hold the brake hose in the braze-ons on the frame or fork (they are either U-shaped or little cylinders). I've looked at wiggle and chainreaction and couldn't find it.
Cheers
Cheers
0
Comments
-
Something like this?
http://www.chainreactioncycles.com/Mode ... delID=1010
or
http://www.wiggle.co.uk/ProductDetail.a ... se%20GuideIt's easier to ask for forgiveness than for permission.
I've bought a new bike....ouch - result
Can I buy a new bike?...No - no result0 -
I think I know what he means...and I haven't been able to find any
Unless of course he means the items you've linked to,in which case there's loads about.
Or maybe he means these..
http://www.chainreactioncycles.com/Models.aspx?ModelID=2492=========================================
Dot 4 in the eye hurts. Trust me0 -
Is this what you guys mean?
http://cgi.ebay.co.uk/SUSPENSION-FORK-D ... dZViewItem
I've been using them a while, i just put some ducktape on the back to stop it scratching the forks.
They were an absolute bitch to find them in the first place though!0 -
That's not really what I meant. I've got all the braze-on on the frame. But to prevent the hose slipping out there are these little black plastic bits...0
-
I know what you mean now, my mate got his with his foxes, i couldn't find them anywhere to attach to my pikes!
Try the importer of the forks maybe?0 -
-
Go into a Marin Dealer and ask for some U-Cable clips and they will probably give them to you (do me anyhoo)
Are these what you mean....
http://www.pinkbike.com/photo/1349683/0 -
Andy_B wrote:Do you mean those 'u' shaped little bits of plastic that fit around the hose & snap into the braze on hose channel, if so just use Zip ties, those little plastic bits are pretty useless & will fall out.
Always found mine to be pretty good - but if you keep taking them off and putting them back on they stretch....0 -
Yes, Cheesey, that's what I'm looking for.
Thanks0 -
No worries mate.0