Forum home› Mountain biking forum› MTB workshop & tech

discs

azza 05azza 05 Posts: 248
edited January 2008 in MTB workshop & tech
would this disc (203mm one) http://www.chainreactioncycles.com/Mode ... odelID=756
work with a 8" inch hayes adaptor and a shimano deore on a set of marzocchi bomber z1`s???
my pinkbike: http://www.pinkbike.com/photo/?op=list& ... erid=94381

Posts

  • nicklousenicklouse Posts: 50,675 Lives Here
    which Z1's Marzocchi have made many Z1's over the last 10 years. Model and year.

    But as it is a 6 bolt fitting disc i ask you this will it fit on your hub? then to you adapter is correct for your fork? then yes it will work. 203mm = 8"
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • azza 05azza 05 Posts: 248
    there 2006 and my hub is a 6 bolt fitting and the adaptor has been used with an xt caliper before with a 203mm disc if that hepls
    my pinkbike: http://www.pinkbike.com/photo/?op=list& ... erid=94381
  • nicklousenicklouse Posts: 50,675 Lives Here
    so at 200d the Z1's were all 20mm axeled and had IS 20mm brake mounts.

    So if the adaptor is the hayes203mm IS 20mm then it will be fine. BUT if it is the 203mm IS mount then it will not work you will need 2 5mm spacers. but the disc is ok what ever.
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • azza 05azza 05 Posts: 248
    ok thnaks alot
    my pinkbike: http://www.pinkbike.com/photo/?op=list& ... erid=94381
Sign In or Register to comment.