Campag 50/36 to 50/34 conversion

Steelride
Steelride Posts: 89
edited January 2008 in Workshop
Any of you guys know where I can get an 34 tooth inner chain ring? Do Campagnolo offer these as spares or would I have to get another make?

Steelride.

Comments

  • andyp
    andyp Posts: 10,573
    Campagnolo do offer them as spares and you can get them via Italian Cycle Products in Derby.

    There is one alternative that I'm aware of TA do a ring called Nerius which fits Campagnolo carbon cranks. Wiggle can order them, as does Total Cycling.
  • rdaviesb
    rdaviesb Posts: 566
    You need a 110mm PCD ring. Try either Spa Cycles, Harrogate, or BikePlus.Co.UK. Both will be able to supply you with a 34tooth ring.
  • Steelride
    Steelride Posts: 89
    That's very helpful. Thanks.
  • Smokin Joe
    Smokin Joe Posts: 2,706
    Steelride,

    you have pm.
  • andyp
    andyp Posts: 10,573
    rdaviesb wrote:
    You need a 110mm PCD ring. Try either Spa Cycles, Harrogate, or BikePlus.Co.UK. Both will be able to supply you with a 34tooth ring.
    If you've got the carbon cranks then you need a special chainring, i.e. a normal 110 PCD ring may not fit due to the way one of the bolts attaches directly to the crank arm.

    I'm not sure if the same is true for the non carbon ones.
  • N0bodyOfTheGoat
    N0bodyOfTheGoat Posts: 6,063
    You've probably thought this through, but perhaps buying a new cassette with more teeth at lower end would be better (as in bigger range of suitable gears) and easier to replace?
    ================
    2020 Voodoo Marasa
    2017 Cube Attain GTC Pro Disc 2016
    2016 Voodoo Wazoo

Categories