shimano brake mount
azza 05
Posts: 248
just fitted my new bomber z1s and need an adaptor to fit a shimao deore to them. i am not sure which one i need so i need some input from the people on here.
thanks in advance aron
thanks in advance aron
0
Comments
-
The Zocchis are post mount, right? What size will you be using?0
-
these ones are IS mount and its a 160mm0
-
As far as I am aware, the Deore will come with the right adaptor to fit your fork. If not, then this:
http://www.chainreactioncycles.com/Mode ... elID=137430 -
also would these work on a normal deore aswell as the XT because these look very similar to the ones i have at the moment???
http://www.cyclestore.co.uk/productDeta ... ctID=134300 -
You would have to tell me the exact model number of Deore, then get back to me.0
-
in the box theres a manual which says the caliper is a m535 and i cannot find any pads under this model number
thanks0 -
The model of pads from Shimano is the M06 for the BR M535. These fit the M965 and M975, so going on that, the link you provide will be fine!
Other Deore calipers use the M08 shape.0 -
thanks alot mate
i have had to put a few washers between the caliper adaptor and the fork mlounts so that the brake sits on the rotor properly will this be ok or will i have to get a proper mount??? thanks0 -
Doesnt the caliper slide left/right on the bracket?0
-
yeah but its not enough unfortuantely0
-
Odd, but using washers is fine.0
-
oh thats good thanks for all your help
0
