new brake hoses

beastinla
beastinla Posts: 304
edited December 2007 in MTB workshop & tech
hi i have just brought a new pair of hayes brakes ( http://www.merlincycles.co.uk/?fn=produ ... goryId=130 ) and i want to get new hoses i was looking at the Goodridge cable system ( http://www.chainreactioncycles.com/Mode ... delID=2938 ) and i just wanted to no if these would work with each other.


thanks for any help

Comments

  • nicklouse
    nicklouse Posts: 50,673
    well if you read what they have put on the webby i would say NO Goodridge cable system but it should be goodridge hydraulic hose. if it is it will work but you will need the correct fittings,
    "Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
    Parktools :?:SheldonBrown
  • artillerydave
    artillerydave Posts: 715
    The hose would work on Hayes brakes however you need new connectors for both brakes also, it is not simply a case of undoing you ones that come with the brakes and reusing them on the goodridge hose, the connectors and hose comes in at about £30 per brake, give or take. So budget about an extra £60 for upgrading the brakes, plus you would need a bleed kit and also new fluid for them once the hoses have been sawpped, so all in a bit more expensive, for my mind save that money and run them as they are or use the extra for the hoses combined with your original spend for a better set at around the £200 mark (juicy ultimates or new XT)

Categories