Need help with identifying these bits??
Jd1986@hotmail.com
Posts: 63
Hi all got a gusset BB and cranks and they will eventually be finding there way on my identiti Dr Jekyll frame when i figure out what parts are what and where they go.
Below is a picture if someone would be kind enough to tell me what the bits are and how they go together.
Obviously bottom left are the bearings themselves with the housings and on the right is the axle, the two black cylinders are the adaptors for the bb.
What im unsure about is what are the rings top left and top right and and what are the two large washers and the smaller one. And how the hell do they assemble together?
Cheers all
James[/img]
Below is a picture if someone would be kind enough to tell me what the bits are and how they go together.
Obviously bottom left are the bearings themselves with the housings and on the right is the axle, the two black cylinders are the adaptors for the bb.
What im unsure about is what are the rings top left and top right and and what are the two large washers and the smaller one. And how the hell do they assemble together?
Cheers all
James[/img]
0
Comments
-
with
make this
axle not shown
typical spacers on the drive side
and all together now.
Ps you axle does not look like a Gusset one.
have fun."Do not follow where the path may lead, Go instead where there is no path, and Leave a Trail."
Parktools :?:SheldonBrown0 -
Yer i thought the same when i looked at it which was strange, but i couldnt identify it as i got it second hand off a friend for little money so it will do until i can afford better.
And cheers for the walk through 8)0
