bottles

Mark Alexander
Mark Alexander Posts: 2,277
edited August 2007 in Workshop
Does anyon have a good way of keeping water bottles clean? I use PSP22 in two and water in the other. both seem to be difficult to clean.
Any ideas?
http://twitter.com/mgalex
www.ogmorevalleywheelers.co.uk

10TT 24:36 25TT: 57:59 50TT: 2:08:11, 100TT: 4:30:05 12hr 204.... unfinished business

Comments

  • fluff.
    fluff. Posts: 771
    SIS do a bottle cleaner http://www.scienceinsport.com/acatalog/Supplements.html
    it's at the bottom of the page, it's just tri-sodium phosphate, so I guess could be found cheaper elsewhere. Other than that, I've used the stuff for sterilising baby milk bottles in the past, but I think prevention is better than curse, if you can rinse and dry them fairly quickly after you get off the bike.
  • soak in milton (sterilising fluid for babies bottles) then rinse out well.
  • schlepcycling
    schlepcycling Posts: 1,614
    If you can stick 'em in the dishwasher or as already mentioned use sterilising fluid/tablets.
    'Hello to Jason Isaacs'
  • OnTow
    OnTow Posts: 130
    Bicarb. - a couple of heaped teaspoons or more, plus warm water - then stand overnight (brimmed up) - I usually stick the lid in the water up-side-down, so the opened nozzle gets a dunking too.
  • bobtravers
    bobtravers Posts: 115
    2 tricks:

    First, pour a teaspoon of Javel with your bottle full of water, let it sit for 3-4 hours, then rinse well... After, put 1 teaspoon of baking soda with half bottle of water, shake well than rinse again... (The recipe is from Camelbacks Hydrapacks...)

    Second way is to put your bottles in the freezer for 1-2 days, then rinse well. Cold kills all bacteria...
  • sonicred007
    sonicred007 Posts: 1,091
    edited August 2007
    wrote in wrong forum - deleted message
  • bobtravers
    bobtravers Posts: 115
    I recently got a langster - online via Wheelies Direct (Cycle to work scheme) - and although the dimension on the spec diagram appeared to be the same as my road bike the compactness of the frame means I'm sat right over the drops compared to my normal road bike.

    Looking at the two bikes side by side the seat post on my road bike bends back. Whereas the Langster is straight up. So I guess changing the style of seat post will make a difference

    However, I guess the easiest and possibly cheapest solution will be fit a longer stem.

    Stem length is currently 100mm (I have the 54). How long do they go to? As far as I can see its 130mm

    Are you sure you posted on the right topic???
  • on the road
    on the road Posts: 5,631
    Washing up liquid?
  • sonicred007
    sonicred007 Posts: 1,091
    bobtravers wrote:
    I recently got a langster - online via Wheelies Direct (Cycle to work scheme) - and although the dimension on the spec diagram appeared to be the same as my road bike the compactness of the frame means I'm sat right over the drops compared to my normal road bike.

    Looking at the two bikes side by side the seat post on my road bike bends back. Whereas the Langster is straight up. So I guess changing the style of seat post will make a difference

    However, I guess the easiest and possibly cheapest solution will be fit a longer stem.

    Stem length is currently 100mm (I have the 54). How long do they go to? As far as I can see its 130mm

    Are you sure you posted on the right topic???

    no. sorry
  • richa
    richa Posts: 1,632
    Normally: Washing up liquid & a bottle brush.
    Sometimes: Dishwasher.
    Occaisionally: Milton tablets.
    Rarely: Throw 'em away and treat yourself to some new ones.
    Rich
  • giant_man
    giant_man Posts: 6,878
    Dishwasher every time, gets them clean as clean.
  • Jonathan Mcp
    Jonathan Mcp Posts: 2,472
    Daily washing in bog standard washing up liquid, with a soak overnight in Milton every few months. I don't have a dishwasher (well, the wife I suppose) and would use one if i could.
  • roger645
    roger645 Posts: 111
    bobtravers wrote:
    2 tricks:

    First, pour a teaspoon of Javel with your bottle full of water, let it sit for 3-4 hours, then rinse well... After, put 1 teaspoon of baking soda with half bottle of water, shake well than rinse again... (The recipe is from Camelbacks Hydrapacks...)

    Second way is to put your bottles in the freezer for 1-2 days, then rinse well. Cold kills all bacteria...

    No it doesn't, think of salmonella in frozen chicken!
    Current Steed: 02 Marin Tiburon
  • spasypaddy
    spasypaddy Posts: 5,180
    i only use water in my bottles at the moment. do they really need to go in the dishwasher?
  • penugent
    penugent Posts: 913
    spasypaddy wrote:
    i only use water in my bottles at the moment. do they really need to go in the dishwasher?

    Do you stick the spout in your mouth when drinking? Does your bottle ever get hit by roadspray?

    Whats hard about sticking the bottle in the dishwasher, unless you don't have one!! Seriously, the dishwasher is easy and effective -- I have never used anything else myself. The only problem is that you need a few bottles so that you aren't using the diswasher every time a single bottle is used