Spring for rear shock?
Pedaldog
Posts: 5
Have a Streetmachine GTE recumbent. It has a Torch rear shock with a 550lb rear spring on it. I am near to bottoming it out, being lardy, so can I get a stronger (8 to 900lb) spring for it and, if so, where?
Eyelets of the shock are 150mm apart and that is all I know. Think it's made by DNM but their website doesn't give any springy stuff on there.
Bike is rated to 120kg with that shock but I weigh 114 plus camping luggage!!!!!!
Eyelets of the shock are 150mm apart and that is all I know. Think it's made by DNM but their website doesn't give any springy stuff on there.
Bike is rated to 120kg with that shock but I weigh 114 plus camping luggage!!!!!!
At the pace of sailing ships and bicycles.
0
Comments
-
You need to measure the length of the spring unloaded, and note down the shock stroke It is usually written on it as well. Replacement springs to order can be got from CRC:
http://www.chainreactioncycles.com/Mode ... elID=156070 -
Cheers Y'all.
At the pace of sailing ships and bicycles.0
