Marz XC 700s Help
guys, I have finally finished off my new MTB, i decided to buy the Marz XC 700s and I went out for a shakedown and found I pulled on the anchors I sometimes get a bit of a clunk comming from the forks (I have checked and double checked the headset and it aint that)
when I got home I had a look at the forks, nothing seems to be wrong, I then turned the handle bars 180 and rocked the bike back and forward and it has a bit of play in the upper stanchions.
is this normal ie do the seals need bedded in or is there something else wrong with them?
cheers
my bikes
Terry Dolan - summer bike
Carrera Vanquish -commuter bike
Kona Cindercone - MTB
when I got home I had a look at the forks, nothing seems to be wrong, I then turned the handle bars 180 and rocked the bike back and forward and it has a bit of play in the upper stanchions.
is this normal ie do the seals need bedded in or is there something else wrong with them?
cheers
my bikes
Terry Dolan - summer bike
Carrera Vanquish -commuter bike
Kona Cindercone - MTB
0
Comments
-
it does sound like a bit of flex, which is quite normal. Zocchis take a while to bed in and IME its better to run them quite hard for a few rides. then have a play with the pressures, and the rebound which does clunk a bit.
when they're run in and set proper, zocchis are superb
Mleh Mleh Mleh0
